Snorkel MHP1335 Operation Manual page 3

The most im por tant chap ter in this man ual is the
safety chap ter - Chap ter 1. Take time, now, to study
it closely.
The in for ma tion in Chap ter 1, might save your life,
pre vent se ri ous in jury, or dam age to prop erty or the
MHP13/35 / MHP15/44 V3.
This in tro duc tion also con tains im por tant in for ma -
tion con cern ing the re spon si bil i ties of the owner of
this ma chine.
Standard MHP13/35 / MHP15/44 V3
The stan dard MHP13/35 / MHP15/44 V3 in cludes
the fol low ing fea tures:
Proportional speed control
Versatile jib boom
Heavy duty tow coupling
Heavy duty jockey wheel
Hydraulic disc brakes
High strength steel boom and base
construction
Reliable gasoline engine
Steel platform - 2 man capacity
600V AC rated wire to platform
Hour meter
Stabiliser lift points
Spare wheel (Australia only)
Spare wheel mount
Lockable hinged covers
Outrigger/boom interlocks
Independently operated hydraulic outriggers
Gravity gate
Options
The fol low ing op tions are avail able for the
MHP13/35 / MHP15/44 V3:
o
360 continuous rotation turntable
Flashing light
110/240V AC GFCI power to platform
Platform rotator
Air line to platform
Spare wheel
Automatic stabilisers
Alternative power options
Alternative gasoline engine
Diesel engine
24V DC battery power
110/240V AC motor and pump
Combinations of the above with gas or
diesel to give a bi-energy power sourcet
MHP13/35 & MHP15/44 V3 – 13619-1
Operation Manual
This man ual pro vides in for ma tion for safe and
proper op er a tion of the ae rial plat form. Read and
un der stand the in for ma tion in this Op er a tor's
man ual be fore op er at ing this ma chine on a job site.
Additional copies of this manual may be ordered
from Snorkel. Supply the model and manual part
number from the front cover to ensure that the
correct manual will be supplied.
All information in this manual is based on the latest
product information at the time of publication.
Snorkel reserves the right to make product
changes at any time without obligation.
Photographs
Pho to graphs are taken to rep re sent the ma chine
and its com po nent parts as clearly as pos si ble.
How ever, there may be mi nor dif fer ences be tween
the pho to graphs and your ma chine. This rep re -
sents in di vid ual cus tomer pref er ences and Snor -
k e l ' s o n - g o i n g c o m m i t t me n t t o p r o d u c t
de vel op ment.
Safety Alerts
A safety alert sym bol is used through out this man -
ual to in di cate dan ger, warn ing and cau tion in struc -
tions. Fol low these in struc tions to re duce the
like li hood of per sonal in jury, prop erty dam age or
dam age to the ma chine.
The terms dan ger, warn ing, and cau tion in di cate
vary ing de grees of per sonal in jury or prop erty dam -
age that can re sult if the in struc tion is not fol lowed.
Denotes an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING
Denotes a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Denotes a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
It may also be used to alert against unsafe
practices or action which may result in
damage to the MHP.
Rev C
Introduction
DANGER
CAUTION
page - ii