Trianco TRO Evolution System Series Installation And Operating Instructions Manual page 17

Boiler setpoint temperature selected using
the corresponding touch button (12).
Underfloor heating installation flow setpoint
temperature selected using the
corresponding touch button (12).
(option SRHFC2/ TRO Evolution System only)
DHW setpoint temperature selected using
the corresponding touch button (16) (with
hot water tank).
Actual boiler pressure, measured by the
Pressure Sensor (6).
Indication of the heating demand status of
each circuit connected to the boiler.
BC
Setpoint of the heating pump speed
1.
The desired display contrast can be adjusted
using the touch button on the right of the
display (16).
page -17