Getting Started with Your New ATA
Supported ATA Call Features
Depending on your system configuration, your ATA supports some or all the following call features:
• Transfer (attended or supervised)—In this type of transfer, you talk to the receiving party before you
• Transfer (unattended or unsupervised)—In this type of transfer, you complete the transfer and hang up
• Conference.
• Hold and Resume.
• Caller ID.
• Call Waiting.
• Call Pickup.
• Speed Dial.
• Music On Hold.
• Shared Lines.
• Voicemail—This feature has no visual indicator, but a message waiting tone when you go off-hook
• Call Forward.
• Redial.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
complete the transfer.
See
Transfer a Call from Your Analog Phone, on page 194
before the receiving party answers.
See
Transfer a Call from Your Analog Phone, on page 194
See
Make a Conference Call from Your Analog Phone, on page 181
See
Put a Call on Hold on Your Analog Phone, on page 187
See
Answer Call Waiting on Your Analog Phone, on page 29
indicates that you have voice messages. Some analog phones with a large LCD screen may display a
voicemail icon.
See
Voicemail on Your Analog Phone, on page 153
See
Call Features and Star Codes for Analog Phones, on page 171
See
Call Features and Star Codes for Analog Phones, on page 171
Supported ATA Call Features
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
Call)
53