Ivr Options For Analog Telephone Adapters; Lost Phone Connectivity; Make A Conference Call From Your Analog Phone - Cisco IP Phone 7800 Series User Manual

Additional Information

IVR Options for Analog Telephone Adapters

Action
Check internet addressing method
Configure IP address
Configure VLAN
Configure default gateway
Configure subnet mask
Factory reset
Reset service mode
Set internet addressing method
Show IP address
Show VLAN
Show default gateway
Show subnet mask

Lost Phone Connectivity

Sometimes your phone loses its connection to the phone network. When this connection is lost, your phone
displays a message.
If you are on an active call when the connection is lost, the call continues. But, you don't have access to all
normal phone features because some functions require information from the call control system. For example,
your softkeys might not work as you expect.
When the phone reconnects to the call control system, you'll be able to use your phone normally again.

Make a Conference Call from Your Analog Phone

You can talk with several people in a single call.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
IVR Code
100
111
231
131
121
73738
73739
101
110
230
130
120

IVR Options for Analog Telephone Adapters

Notes
Answer with 0, the default option
(DHCP).
Available in static IP mode only.
To disable VLAN, set VLAN ID to
4095.
To enable VLAN, set VLAN ID
from 1 to 4095.
Available in static IP mode only.
Available in static IP mode only.
Erases all user data except network
setting and log files.
DCHP: 0
Static: 1
Call)
181