Cisco IP Phone 7800 Series User Manual page 179

Your Cisco IP Phone 8800 Series
Figure 19: Cisco IP Phone 8845 Buttons and Hardware
The following table describes the Cisco IP Phone 8800 Series Buttons.
Table 11: Cisco IP Phone 8800 Series Buttons
1
2
3
4
5
6
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Handset and Handset light strip
Camera
Cisco IP Phone 8845, 8865, and
8865NR only
Programmable feature buttons
and line buttons
Softkey buttons
Back, Navigation cluster, and
Release
Hold/Resume, Conference,
and Transfer
Cisco IP Phone 8800 Series Buttons and Hardware
Indicates whether you have an incoming call (flashing red) or a
new voice message (steady red).
Use the camera for video calls.
Access your phone lines, features, and call sessions.
When adding features to the phone line keys, you are limited by
the number of line keys available. You cannot add more features
than the number of line keys on your phone.
Access to functions and services.
Back Return to the previous screen or menu.
Navigation cluster Navigation ring and Select button—Scroll
through menus, highlight items and select the highlighted item.
Release End a connected call or session.
Hold/Resume Place an active call on hold and resume the
held call.
Conference Create a conference call.
Transfer Transfer a call.
Call)
165