Cisco Ip Phone 7832 Buttons And Hardware - Cisco IP Phone 7800 Series User Manual

Cisco IP Phone 7832 Buttons and Hardware

Like other devices, a Cisco IP Phone must be configured and managed. These phones encode and decode the
following codecs:
• G.711 a-law
• G.711 mu-law
• G.722
• G722.2 AMR-WB
• G.729a/G.729ab
• G.726
• iLBC
• Opus
• iSAC
Caution Using a cell, mobile, or GSM phone, or two-way radio in close proximity to a Cisco IP Phone might cause
interference. For more information, see the manufacturer's documentation of the interfering device.
Cisco IP Phones provide traditional telephony functionality, such as call forwarding and transferring, redialing,
speed dialing, conference calling, and voice messaging system access. Cisco IP Phones also provide a variety
of other features.
Finally, because the Cisco IP Phone is a network device, you can obtain detailed status information from it
directly. This information can assist you with troubleshooting any problems users might encounter when using
their IP phones. You can also obtain statistics about an active call or firmware versions on the phone.
Cisco IP Phone 7832 Buttons and Hardware
The following figure shows the Cisco IP Conference Phone 7832.
Figure 15: Cisco IP Conference Phone 7832 Buttons and Features
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
156
Your Cisco IP Conference Phone 7832