Mobile Device Charging - Cisco IP Phone 7800 Series User Manual

Mobile Device Charging

Mobile Device Charging
You can use the USB ports on your phone to charge your mobile device if the device has a USB connection.
The following ports support USB charging:
• Side port—Provides standard device charging.
• Back port (Cisco IP Phone 8861, 8865, and 8865NR only)—Provides standard device charging as well
Your phone continues to charge the mobile device while it is in power-saving mode but stops charging in
Power Save Plus mode.
When you use your phone to charge your mobile device, the following conditions apply:
• A short delay may occur before charging begins.
• In some situations, your device will not display the charging icon. For example, the icon may not display
• When more than one Cisco IP Phone 8800 Key Expansion Module is attached to your phone, the back
If you unplug your tablet and immediately plug in a USB headset to the phone, a 3-second delay occurs before
the phone recognizes the USB headset.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
136
as fast-charging.
when the device is fully charged.
USB port cannot fast-charge the device.
Support for USB Devices on the Cisco IP Phone 8800 Series