Table of Contents
Advertisement
Configuring Text Overlay Settings
Purpose:
You can customize the text overlay.
Steps:
1. Enter the Text Overlay settings interface:
Configuration > Image > OSD Settings
2. Check the checkbox in front of textbox to enable the on-screen display.
3. Input the characters in the textbox.
4. Use the mouse to drag the red text frame
overlay position.
5. Click
6.3.3 Configuring Privacy Mask
Purpose:
It enables you to cover certain areas on the live video to prevent certain spots in the surveillance
area from being live viewed and recorded.
Note:
The function may not be supported by certain camera models.
Steps:
1. Check the checkbox of Enable Privacy Mask to enable this function.
2. Click Draw Area and drag the mouse in the live video window to draw the mask area..
3. Click Stop Drawing to finish drawing or click Clear All to clear all of the areas you set without
saving them.
4. Click
© Hikvision
Text
in the live view window to adjust the text
to save the settings.
Figure 6-38 Setting Privacy Mask
to activate above settings.
Advertisement
Table of Contents
