Table of Contents
Advertisement
5.4.2 Configuring Park Actions
Purpose:
This feature allows the camera to start a predefined park action (scan, preset, pattern and etc.)
automatically after a period of inactivity (park time).
Notes:
Scheduled Tasks function is prior to Park Action function. When these two functions are set
at the same time, only the Scheduled Tasks function takes effect.
Park function varies depending on different camera models.
Steps:
1. Enter the Park Action settings interface:
Configuration > PTZ > Park Action
2. Check the Enable Park Action checkbox.
3. Set the Park Time as the inactivity time of the camera before it starts the park actions.
4. Choose Action Type from the dropdown list.
5. If you select Patrol, Pattern, or Preset as Action Type, you need to select Action Type ID from
the dropdown list.
6. Click
5.4.3 Configuring Scheduled Tasks
Purpose:
You can configure the zoom camera to perform a certain action automatically in a user-defined
time period.
Steps:
1.
Enter the Scheduled Task settings interface:
Configuration> PTZ > Scheduled Tasks
© Hikvision
Figure 5-24 Set the Park Action
to save the settings.
Advertisement
Table of Contents
