Table of Contents
Advertisement
2. Use the PTZ control buttons to move the lens to the desired position.
• Zoom in or out.
• Refocus the lens.
3. Click
to finish the setting of the current preset.
4. Edit a preset name by double clicking on the default name such as preset 1. (The pre-defined
presets are named already but not configurable. Refer to the user manual for detailed
function description.)
5. You can click
to delete the preset.
Note:
You can configure up to 254 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
Notes:
Preset 49 is predefined with Memory Time. You can only call it but not configure it.
Pattern function varies depending on different camera models
4.5.4 Setting/Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on the patrol
settings interface. There are up to 8 patrols for customizing. A patrol can be configured with 32
presets.
Before you start:
Make sure that the presets you want to add into a patrol have been defined.
Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from the list and click
3. Click
to enter the adding interface of preset, as shown in Figure 4-8.
© Hikvision
Figure 4-7 Calling a Preset
to enter the patrol settings interface.
.
to call the preset.
.
Advertisement
Table of Contents
