HIKVISION DS-2DY7236IX-A User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2DY7236IX-A
  6. User manual
HIKVISION DS-2DY7236IX-A User Manual

HIKVISION DS-2DY7236IX-A User Manual

Network speed dome & positioning system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Speed Dome & Positioning System
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-2DY7236IX-A and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-2DY7236IX-A

Summary of Contents for HIKVISION DS-2DY7236IX-A

  • Page 1 Network Speed Dome & Positioning System User Manual...
  • Page 2 INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
  • Page 3 Network Speed Dome & Positioning System User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

  • Page 4: Table Of Contents

    Network Speed Dome & Positioning System User Manual Contents Chapter 1 Overview ........................1 1.1 Product Introduction ......................1 1.2 Key Function ........................1 1.3 System Requirement......................2 Chapter 2 Device Activation and Accessing ..................3 2.1 Activate Device ......................... 3 2.1.1 Activate Device via Web Browser ................
  • Page 5 Network Speed Dome & Positioning System User Manual 4.3 Set Patrol Scan ........................ 21 4.3.1 Set One-Touch Patrol ................... 22 4.4 Set Pattern Scan ......................23 4.5 Set Limit .......................... 23 4.6 Set Initial Position ......................24 4.7 Set Scheduled Tasks ......................24 4.8 Set Park Action........................
  • Page 6 Network Speed Dome & Positioning System User Manual 5.2 Set Transmission Parameters ..................33 Chapter 6 Video and Audio ......................35 6.1 Video Settings ......................... 35 6.1.1 Stream Type ......................35 6.1.2 Video Type ......................35 6.1.3 Resolution ......................35 6.1.4 Bitrate Type and Max.
  • Page 7 Network Speed Dome & Positioning System User Manual 7.1.3 Set NAS ......................... 49 7.1.4 eMMC Protection ....................50 7.1.5 Set Cloud Storage ....................50 7.2 Video Recording ......................51 7.2.1 Record Automatically ................... 51 7.2.2 Record Manually ....................52 7.2.3 Playback and Download Video ................53 7.3 Capture Configuration ....................
  • Page 8 Network Speed Dome & Positioning System User Manual 9.2.3 Send Email ......................73 9.2.4 Notify Surveillance Center..................74 9.2.5 Smart Tracking ..................... 74 9.2.6 Trigger Recording ....................74 Chapter 10 Network Settings ....................... 75 10.1 TCP/IP ........................... 75 10.1.1 Multicast ......................76 10.1.2 Multicast Discovery ....................
  • Page 9 Network Speed Dome & Positioning System User Manual 11.4 Import and Export Configuration File................89 11.5 Export Diagnose Information ..................89 11.6 Reboot .......................... 89 11.7 Upgrade ........................89 11.8 View Open Source Software License ................90 11.9 Set Live View Connection ....................90 11.10 Time and Date ......................

  • Page 10: Chapter 1 Overview

    Network Speed Dome & Positioning System User Manual Chapter 1 Overview 1.1 Product Introduction The device is an integration of HD camera, PTZ motion control module, and video content analysis algorithms, ideal for remote monitoring. The device has basic PTZ functions, such as presets, scans, and target tracking, and smart functions, such as Face Capture and Smart Event.

  • Page 11: System Requirement

    Network Speed Dome & Positioning System User Manual 1.3 System Requirement Your computer should meet the requirements for visiting and operating the product. Recommended Specifications Microsoft Windows XP/ Windows 7/ Windows 8/ Windows 10 Operating System Mac OS 10.13 or later Intel®...

  • Page 12: Chapter 2 Device Activation And Accessing

    Network Speed Dome & Positioning System User Manual Chapter 2 Device Activation and Accessing To protect the security and privacy of the user account and data, you should set a login password to activate the device when access the device via network. Note Refer to the user manual of the software client for the detailed information about the client software activation.

  • Page 13: Activate Via Sadp

    Before You Start ● Get the SADP software from the supplied disk or the official website http://www.hikvision.com/, and install the SADP according to the prompts. ● The device and the PC that runs the SADP tool should belong to the same subnet.

  • Page 14: Access Device Via Web Browser

    Network Speed Dome & Positioning System User Manual 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Input the admin password and click Modify to activate your IP address modification. 2.2 Access Device via Web Browser Before You Start Check the system requirement to confirm that the operating computer and web browser meets...

  • Page 15: Admin Password Recovery

    Network Speed Dome & Positioning System User Manual Operating System Web Browser Operation Network → Advanced Mac Safari 12+ Settings → Network Service to enable WebSocket or Websockets for normal view. Display and operation of certain functions are restricted. For example, Playback and Picture are not available.

  • Page 16: Illegal Login Lock

    Network Speed Dome & Positioning System User Manual 2.2.3 Illegal Login Lock It helps to improve the security when accessing the device via Internet. Go to Configuration → System → Security → Security Service, and enable Enable Illegal Login Lock. Illegal Login Attempts and Locking Duration are configurable. Illegal Login Attempts When your login attempts with the wrong password reach the set times, the device is locked.

  • Page 17: Chapter 3 Smart Function

    Network Speed Dome & Positioning System User Manual Chapter 3 Smart Function 3.1 Allocate VCA Resource VCA resource offers you options to enable certain VCA functions according to actual needs. It helps allocate more resources to the desired functions. Steps 1.
  • Page 18 Network Speed Dome & Positioning System User Manual triggers linkage actions automatically. Steps 1. Go to Open Platform → Face Capture → Rule. 2. Check Enable. 3. Select a configuration mode. Normal One detection scene is allowed to be set. The device captures face in the scene in set arming schedule.

  • Page 19: Operate Manual Face Capture

    Network Speed Dome & Positioning System User Manual Expert Mode Settings Steps 1. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action during configuration. Normally, the PTZ control is automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over.

  • Page 20: Overlay And Capture

    Network Speed Dome & Positioning System User Manual 3. Draw a frame to select the target face in live view image. The captured picture can be uploaded to the center. 4. Click the icon again to stop manual face capture. 3.3.3 Overlay and Capture Choose to configure capture parameters and the information you want to display on stream and picture.
  • Page 21 Network Speed Dome & Positioning System User Manual It refers to the current algorithm version, which cannot be edited. Restore Defaults Click Restore to restore all the settings in advanced configuration to the factory default. Capture Parameters Upload Feature Feature stands for the feature information the algorithm can tell from face pictures. Check the function to upload the information.

  • Page 22: Face Comparison

    Network Speed Dome & Positioning System User Manual It refers to the quality of face to trigger quick shot. Max. Capture Interval It describes the max. time occupation for one quick shot. Capture Times It refers to the capture times a face will be captured during its stay in the configured area. Unlimited The device keeps capturing the target face, which exceeds the Quick Shot Threshold during the Max.

  • Page 23: Set Face Picture Library

    Network Speed Dome & Positioning System User Manual 3.4.1 Set Face Picture Library Face picture library is used to store modeled human faces and information. Steps 1. Go to Open Platform → Face Picture Library. 2. Create a face picture library. 1) Click to add a face picture library.

  • Page 24: Set Face Picture Comparison

    Network Speed Dome & Positioning System User Manual 5) Click OK. 5. Create models for each face picture in library. Modeling process builds up face model for each face picture. Face model is compulsory for face picture comparison to take effect. Modeling Select one or more face pictures, and click Modeling.

  • Page 25: View Face Comparison Result

    Network Speed Dome & Positioning System User Manual 7. Set arming schedule. See Set Arming Schedule. 8. Set linkage method. See Linkage Method Settings. 3.4.3 View Face Comparison Result Steps 1. Go to Application. 2. Set search condition and click Counting. Matched results are shown in Face Picture Comparison Statistics area.
  • Page 26 Network Speed Dome & Positioning System User Manual Note The browser cache has a limited size. The recommended number of pictures to download is no more than 200. Layout Click and choose Layout. Check the display content you need to add it to the smart display page.

  • Page 27: Chapter 4 Ptz

    Network Speed Dome & Positioning System User Manual Chapter 4 PTZ PTZ is an abbreviation for pan, tilt, and zoom. It means the movement options of the camera. 4.1 PTZ Control In live view interface, you can use the PTZ control buttons to control the device panning, tilting, and zooming.
  • Page 28 Network Speed Dome & Positioning System User Manual Speed. Choose Pedestrian when you monitor the Pedestrian pedestrians. Choose Non-motor Vehicle when you monitor Non-motor Vehicle the non-motor vehicles. Choose Motor Vehicle when you monitor the Motor Vehicle motor vehicles. You are recommended to set it as Auto when Auto the application scene of the speed dome is complicated.

  • Page 29: Set Preset

    Network Speed Dome & Positioning System User Manual Iris When the image is too dark, click the button to enlarge the iris. When the image is too bright, click the button to stop down the iris. 4.2 Set Preset A preset is a predefined image position. For the defined preset, you can call the preset No. to view the position.

  • Page 30: Special Presets

    Network Speed Dome & Positioning System User Manual 4.2.1 Special Presets You can call the following presets with special demands to enable corresponding functions. Preset No. Function Preset No. Function Auto flip Set manual limits Back to origin Save manual limits Call patrol 1 Remote reboot Call patrol 2...

  • Page 31: Set One-Touch Patrol

    Network Speed Dome & Positioning System User Manual Time It is the duration staying on one patrol point. Delete the presets in patrol. Adjust the preset order. Note A patrol can be configured with 32 presets at most, and 2 presets at least. 4.

  • Page 32: Set Pattern Scan

    Network Speed Dome & Positioning System User Manual 4.4 Set Pattern Scan The device can move as the recorded pattern. Steps 1. Click to show the PTZ control panel, and click 2. Select one pattern scan path that needs to be set. 3.

  • Page 33: Set Initial Position

    Network Speed Dome & Positioning System User Manual 3. Click Set and set limits according to the prompt on the live image. 4. Optional: Click Clear to clear the limit settings of the selected mode. 5. Click Save. 6. Check Enable Limit. Note If you need to cancal all the set patrol paths, go to Configuration →...

  • Page 34: Set Park Action

    Network Speed Dome & Positioning System User Manual Note If you want to clear all scheduled tasks, go to Configuration → PTZ → Clear Config, check Clear All Scheduled Tasks, and click Save. 4.8 Set Park Action You can set the device to perform an action (for example, preset or patrol) or return to a position after a period of inactivity (park time).

  • Page 35: Set Device Position

    Network Speed Dome & Positioning System User Manual Click Draw Area, and click on the live view Draw Area image to determine the boundary of the mask. Stop Drawing ClickStop Drawing after drawing the mask. 4. Click Add. It is listed in Privacy Mask List. 5.

  • Page 36: Set Manual Compass

    Network Speed Dome & Positioning System User Manual Sensitivity The higher the value is, the easier the alarm will be triggered. Upload Vandal-proof Alarm The device uploads the alarm information when the alarm is triggered. Vandal-proof Alarm Voice Warning The camera triggers the alarm with audible warning. 5.

  • Page 37: Set Power Off Memory

    Network Speed Dome & Positioning System User Manual Steps 1. Select the PT Mode as Auto. 2. Click Calibrate to synchronize the north of the device with that of the e-compass. 4.11 Set Power Off Memory This function can resume the previous PTZ status of device after it restarting from a power-off. Steps 1.
  • Page 38 Network Speed Dome & Positioning System User Manual 1) Adjust the live image to a desired scene via PTZ control buttons, and click Add. 2) Set the Rate and the Calibration Point Amount of the added scene. Note More calibration points may increase calibration accuracy, but more focusing time is required.

  • Page 39: Chapter 5 Live View

    Network Speed Dome & Positioning System User Manual Chapter 5 Live View It introduces the live view parameters, function icons and transmission parameters settings. 5.1 Live View Parameters The supported functions vary depending on the model. 5.1.1 Start and Stop Live View Click Live View.

  • Page 40: Select The Third-Party Plug-In

    Network Speed Dome & Positioning System User Manual 5.1.5 Select the Third-Party Plug-in When the live view cannot display via certain browsers, you can change the plug-in for live view according to the browser. Steps 1. Click Live View. 2. Click to select the plug-in.

  • Page 41: Count Pixel

    Network Speed Dome & Positioning System User Manual 5.1.9 Count Pixel It helps to get the height and width pixel of the selected region in the live view image. Steps 1. Click to enable the function. 2. Drag the mouse on the image to select a desired rectangle area. The width pixel and height pixel are displayed on the bottom of the live view image.

  • Page 42: Lens Initialization

    Network Speed Dome & Positioning System User Manual 5.1.12 Lens Initialization Lens initialization is used on the device equipped with motorized lens. The function can reset lens when long time zoom or focus results in blurred image. This function varies according to different models.
  • Page 43 Network Speed Dome & Positioning System User Manual UDP is suitable for the unstable network environment that does not demand high video fluency. MULTICAST MULTICAST is suitable for the situation that there are multiple clients. You should set the multicast address for them before selection. Note For detailed information about multicast, refer to Multicast.

  • Page 44: Chapter 6 Video And Audio

    Network Speed Dome & Positioning System User Manual Chapter 6 Video and Audio This part introduces the configuration of video and audio related parameters. 6.1 Video Settings This part introduces the settings of video parameters, such as, stream type, video encoding, and resolution.

  • Page 45: Bitrate Type And Max. Bitrate

    Network Speed Dome & Positioning System User Manual and storage. 6.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The compression speed is fast, but mosaic may occur on the image. Variable Bitrate It means that the device automatically adjust the bitrate under the set Max.

  • Page 46: Profile

    Network Speed Dome & Positioning System User Manual can estimate the HDD consumption by its maximum average bitrate. Compared to H.264, H.264+ reduces storage by up to 50% with the same maximum bitrate in most scenes. When H.264+ is enabled, Max. Average Bitrate is configurable. The device gives a recommended max.

  • Page 47: Svc

    Network Speed Dome & Positioning System User Manual steady and reliable data bits while requiring more storage space. 6.1.10 SVC Scalable Video Coding (SVC) is the name for the Annex G extension of the H.264 or H.265 video compression standard. The objective of the SVC standardization has been to enable the encoding of a high-quality video bitstream that contains one or more subset bitstreams that can themselves be decoded with a complexity and reconstruction quality similar to that achieved using the existing H.264 or H.265...

  • Page 48: Environmental Noise Filter

    Network Speed Dome & Positioning System User Manual 6.2.2 Environmental Noise Filter Set it as OFF or ON. When the function is enabled, the noise in the environment can be filtered to some extent. 6.3 Two-way Audio It is used to realize the two-way audio function between the monitoring center and the target in the monitoring screen.

  • Page 49: Display Info. On Stream

    Network Speed Dome & Positioning System User Manual 3) Click Stop Drawing. Note Select the fixed region that needs to be adjusted and drag the mouse to adjust its position. 5. Input the Region Name and ROI Level. 6. Click Save. Note The higher the ROI level is, the clearer the image of the detected region is.
  • Page 50 Network Speed Dome & Positioning System User Manual Select a scene according to the actual installation environment to speed up the display settings. Image Adjustment By adjusting the Brightness, Saturation, Contrast and Sharpness, the image can be best displayed. Exposure Settings Exposure is controlled by the combination of iris, shutter, and gain.
  • Page 51 Network Speed Dome & Positioning System User Manual The device focuses once after the PTZ and lens zooming. If the image is clear, the focus does not change when the scene changes. Manual You can adjust the focus manually on the live view page. Min.
  • Page 52 Network Speed Dome & Positioning System User Manual IR Light Mode When the mode is set to Auto, the supplement light is automatically turned in or off according to the image brightness. Brightness Limit Adjust the upper limit of supplement light power. If you focus on an object against strong backlight, the object will be too dark to be seen clearly.

  • Page 53: Image Parameters Switch

    Network Speed Dome & Positioning System User Manual White Balance White balance is the white rendition function of the camera. It is used to adjust the color temperature according to the environment. Defog You can enable the defog function when the environment is foggy and the image is misty. It enhances the subtle details so that the image appears clearer.

  • Page 54: Mirror

    Network Speed Dome & Positioning System User Manual 6.6.3 Mirror When the live view image is the reverse of the actual scene, this function helps to display the image normally. Select the mirror mode as needed. Note The video recording will be shortly interrupted when the function is enabled. 6.6.4 Video Standard Video standard is an ability of a video card or video display device that defines the amount of colors that are shown and the resolution.

  • Page 55: Chapter 7 Video Recording And Picture Capture

    Network Speed Dome & Positioning System User Manual Chapter 7 Video Recording and Picture Capture This part introduces the operations of capturing video clips and snapshots, playback, and downloading captured files. 7.1 Storage Settings This part introduces the configuration of several common storage paths. 7.1.1 Memory Card You can view the capacity, free space, status, type, and property of the memory card.
  • Page 56 The device detects the status of Hikvision memory card. You receive notifications when your memory card is detected abnormal. Before You Start The configuration page only appears when a Hikvision memory card is installed to the device. Steps 1. Go to Configuration → Storage → Storage Management → Memory Card Detection.

  • Page 57: Set Ftp

    Network Speed Dome & Positioning System User Manual 2. Click Status Detection to check the Remaining Lifespan and Health Status of your memory card. Remaining Lifespan It shows the percentage of the remaining lifespan. The lifespan of a memory card may be influenced by factors such as its capacity and the bitrate.

  • Page 58: Set Nas

    Network Speed Dome & Positioning System User Manual task. Before You Start Get the FTP server address first. Steps 1. Go to Configuration → Network → Advanced Settings → FTP. 2. Configure FTP settings. Server Address and Port The FTP server address and corresponding port. User Name and Password The FTP user should have the permission to upload pictures.

  • Page 59: Emmc Protection

    Network Speed Dome & Positioning System User Manual File Path The saving path of network disk files. Mounting Type Select file system protocol according to the operation system. Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected.

  • Page 60: Video Recording

    Network Speed Dome & Positioning System User Manual the default port. AccessKey The key to log in to the cloud video manager. SecretKey The key to encrypt the data stored in the cloud video manager. User Name and The user name and password of the cloud video manager. Password Picture Storage Pool The ID of the picture storage region in the cloud video manager.

  • Page 61: Record Manually

    Network Speed Dome & Positioning System User Manual recorded after receiving alarm signal from external alarm input device. Motion | Alarm Video is recorded when motion is detected or alarm signal is received from the external alarm input device. Motion & Alarm Video is recorded only when motion is detected and alarm signal is received from the external alarm input device.

  • Page 62: Playback And Download Video

    Network Speed Dome & Positioning System User Manual 7.2.3 Playback and Download Video You can search, playback and download the videos stored in the local storage or network storage. Steps 1. Click Playback. 2. Set search condition and click Search. The matched video files showed on the timing bar.

  • Page 63: Capture Manually

    Network Speed Dome & Positioning System User Manual Capture a picture when an event is triggered. 3. Set the Format, Resolution, Quality, Interval, and Capture Number. 4. Refer to Set Arming Schedule for configuring schedule time. 5. Click Save. 7.3.2 Capture Manually Steps 1.

  • Page 64: Chapter 8 Event And Alarm

    Network Speed Dome & Positioning System User Manual Chapter 8 Event and Alarm This part introduces the configuration of events. The device takes certain response to triggered alarm. 8.1 Basic Event 8.1.1 Set Motion Detection This function detects moving objects in the detection region and triggers linkage actions. Steps Note This function is not available when Smart Event is enabled.
  • Page 65 Network Speed Dome & Positioning System User Manual Figure 8-1 Set Rules Stop Drawing Stop drawing one area. Clear All Clear all the areas. 4. Optional: You can set the parameters of multiple areas by repeating the above steps. Expert Mode You can configure different motion detection parameters for day and night according to the actual needs.

  • Page 66: Set Video Tampering Alarm

    Network Speed Dome & Positioning System User Manual The higher the value of sensitivity is, the more sensitive the motion detection is. If scheduled image settings is enabled, the sensitivity of day and night can be set separately. 3. Select an Area and click Draw Area. Click and drag the mouse on the live image and then release the mouse to finish drawing one area.

  • Page 67: Set Exception Alarm

    Network Speed Dome & Positioning System User Manual Figure 8-3 Set Video Tampering Area 5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 6. Click Save. 8.1.3 Set Exception Alarm Exception such as network disconnection can trigger the device to take corresponding action.

  • Page 68: Set Alarm Input

    Network Speed Dome & Positioning System User Manual IP Address Conflicted The IP address of current device is same as that of other device in the network. Illegal Login Incorrect user name or password is entered. 3. Refer to Linkage Method Settings for setting linkage method. 4.

  • Page 69: Set Intrusion Detection

    Network Speed Dome & Positioning System User Manual Detect sudden loss of audio track. Sudden Increase of Sound Intensity Detection Detect sudden increase of sound intensity. Sensitivity and Sound Intensity Threshold are configurable. Note ● The lower the sensitivity is, the more significant the change should be to trigger the detection.
  • Page 70 Network Speed Dome & Positioning System User Manual 3) Click on the live image to draw the boundaries of the detection area, and right click to complete drawing. 6. Optional: Set the minimum size and the maximum size for the target to improve detection accuracy.

  • Page 71: Set Line Crossing Detection

    Network Speed Dome & Positioning System User Manual 8.2.3 Set Line Crossing Detection Line crossing detection is used to detect the object movement of crossing a predefined line. When it occurs, the device takes linkage actions as response. Before You Start You need to enable Smart Event on the VCA Resource page to show the configuration page.

  • Page 72: Set Region Entrance Detection

    Network Speed Dome & Positioning System User Manual Figure 8-5 Draw Line 6. Optional: Set the minimum size and the maximum size for the target to improve detection accuracy. Only targets whose size are between the maximum size and the minimum size trigger the detection.
  • Page 73 Network Speed Dome & Positioning System User Manual Steps 1. Go to Open Platform → Smart Event → Region Entrance Detection. 2. Check Enable. 3. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action during configuration.

  • Page 74: Set Region Exiting Detection

    Network Speed Dome & Positioning System User Manual Figure 8-6 Draw Area 8. Click Save. 9. Repeat above steps to set other regions. 10. Set arming schedule. See Set Arming Schedule. 11. Set linkage method. See Linkage Method Settings. 8.2.5 Set Region Exiting Detection Region exiting detection is used to detect the objects movement of exiting from a predefined area.

  • Page 75: Set Object Removal Detection

    Network Speed Dome & Positioning System User Manual 3) Click on the live image to draw the boundaries of the detection area, and right click to complete drawing. 6. Optional: Set the minimum size and the maximum size for the target to improve detection accuracy.
  • Page 76 Network Speed Dome & Positioning System User Manual area, such as exhibits on display. When it occurs, the device takes linkage actions as response. Before You Start You need to enable Smart Event on the VCA Resource page to show the configuration page. See Allocate VCA Resource for instructions.

  • Page 77: Set Unattended Baggage Detection

    Network Speed Dome & Positioning System User Manual Figure 8-8 Draw Area 8. Click Save. 9. Repeat above steps to set other regions. 10. Set arming schedule. See Set Arming Schedule. 11. Set linkage method. See Linkage Method Settings. 8.2.7 Set Unattended Baggage Detection Unattended baggage detection is used to detect the objects left over in the predefined area.
  • Page 78 Network Speed Dome & Positioning System User Manual 3) Click on the live image to draw the boundaries of the detection area, and right click to complete drawing. 6. Optional: Set the minimum size and the maximum size for the target to improve detection accuracy.

  • Page 79: Set Tracking Parameters

    Network Speed Dome & Positioning System User Manual 8.2.8 Set Tracking Parameters Adjust the motion parameters of the device for better target tracking performance. Steps 1. Go to Open Platform → Smart Event → Advanced Parameters. 2. Optional: Check Tuning Mode. Note Tuning mode is to display the information that helps debugging the function.

  • Page 80: Chapter 9 Arming Schedule And Alarm Linkage

    Network Speed Dome & Positioning System User Manual Chapter 9 Arming Schedule and Alarm Linkage Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is the response to the detected certain incident or target during the scheduled time. 9.1 Set Arming Schedule Set the valid time of the device tasks.

  • Page 81: Ftp/Nas/Memory Card Uploading

    Network Speed Dome & Positioning System User Manual Automatic Alarm Set the automatic alarm parameters, then the device triggers an alarm output automatically in the set arming schedule. Steps 1. Set automatic alarm parameters. Alarm Output No. Select the alarm output No. according to the alarm interface connected to the external alarm device.

  • Page 82: Send Email

    Network Speed Dome & Positioning System User Manual triggered. Refer to Set FTP to set the FTP server. Refer to Set NAS for NAS configuration. Refer to Set New or Unencrypted Memory Card for memory card storage configuration. 9.2.3 Send Email Check Send Email, and the device sends an email to the designated addresses with alarm information when an alarm event is detected.

  • Page 83: Notify Surveillance Center

    Network Speed Dome & Positioning System User Manual 5) Input the receiver's information, including the receiver's name and address. 6) Click Test to see if the function is well configured. 3. Click Save. 9.2.4 Notify Surveillance Center Check Notify Surveillance Center, the alarm information is uploaded to the surveillance center when an alarm event is detected.

  • Page 84: Chapter 10 Network Settings

    Network Speed Dome & Positioning System User Manual Chapter 10 Network Settings 10.1 TCP/IP TCP/IP settings must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.

  • Page 85: Multicast

    Network Speed Dome & Positioning System User Manual Manual Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required information. It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer transaction.

  • Page 86: Port

    Network Speed Dome & Positioning System User Manual detected by client software via private multicast protocol in the LAN. 10.2 Port The device port can be modified when the device cannot access the network due to port conflicts. Caution Do not modify the default port parameters at will, otherwise the device may be inaccessible. Go to Configuration →...

  • Page 87: Port Mapping

    Network Speed Dome & Positioning System User Manual 10.3 Port Mapping By setting port mapping, you can access devices through the specified port. Before You Start When the ports in the device are the same as those of other devices in the network, refer to Port to modify the device ports.

  • Page 88: Set Port Mapping On Router

    Network Speed Dome & Positioning System User Manual same as those on the device. For more information, refer to the router user manual. 10.3.3 Set Port Mapping on Router The following settings are for a certain router. The settings vary depending on different models of routers.

  • Page 89: Snmp

    Network Speed Dome & Positioning System User Manual 10.4 SNMP You can set the SNMP network management protocol to get the alarm event and exception messages in network transmission. Before You Start Before setting the SNMP, you should download the SNMP software and manage to receive the device information via SNMP port.

  • Page 90: Access To Device Via Pppoe Dial Up Connection

    Network Speed Dome & Positioning System User Manual By Browsers Enter the domain name in the browser address bar to access the device. By Client Software Add domain name to the client software. Refer to the client manual for specific adding methods. 10.6 Access to Device via PPPoE Dial Up Connection This device supports the PPPoE auto dial-up function.

  • Page 91: Accessing Via Mobile Client

    Network Speed Dome & Positioning System User Manual 10.7 Accessing via Mobile Client Hik-Connect is an application for mobile devices. Using the App, you can view live image, receive alarm notification and so on. Note Hik-Connect service should be supported by the camera. 10.7.1 Enable Service on Camera Hik-Connect...

  • Page 92: Set Up Hik-Connect

    1. Get and install Hik-Connect application by the following ways. Visit https://appstore.hikvision.com to download the application according to your mobile phone system.Visit the official site of our company. Then go to Support → Tools → Hikvision App Store.Scan the QR code below to download the application.

  • Page 93: Set Isup

    Network Speed Dome & Positioning System User Manual Note ● The required verification code is the code you create or change when you enable Hik-Connect service on the camera. ● If you forget the verification code, you can check the current verification code on Platform Access configuration page via web browser.

  • Page 94: Set Network Service

    Network Speed Dome & Positioning System User Manual Modify Modify the selected Open Network Video Interface user. 4. Click Save. 5. Optional: Repeat the steps above to add more Open Network Video Interface users. 10.10 Set Network Service You can control the ON/OFF status of certain protocol as desired. Steps Note This function varies according to different models.

  • Page 95: Set Alarm Server

    Network Speed Dome & Positioning System User Manual TLS (Transport Layer Security) The device offers TLS1.1, TLS1.2 and TLS1.3. Enable one or more protocol versions according to your need. Bonjour Uncheck to disable the protocol. 3. Click Save. 10.11 Set Alarm Server The device can send alarms to destination IP address or host name through HTTP, HTTPS, or ISUP protocol.
  • Page 96 Network Speed Dome & Positioning System User Manual protocol, intended to provide encryption, message authentication and integrity, and replay attack protection to the RTP data in both unicast and multicast applications. Steps 1. Go to Configuration → Network → Advanced Settings → SRTP. 2.

  • Page 97: Chapter 11 System And Security

    Network Speed Dome & Positioning System User Manual Chapter 11 System and Security It introduces system maintenance, system settings and security management, and explains how to configure relevant parameters. 11.1 View Device Information You can view device information, such as Device No., Model, Serial No. and Firmware Version. Enter Configuration →...

  • Page 98: Import And Export Configuration File

    Network Speed Dome & Positioning System User Manual 11.4 Import and Export Configuration File It helps speed up batch configuration on other devices with the same parameters. Steps 1. Export configuration file. 1) Go to Configuration → System → Maintenance → Upgrade & Maintenance. 2) Click Device Parameters and input the encryption password to export the current configuration file.

  • Page 99: View Open Source Software License

    Network Speed Dome & Positioning System User Manual Firmware Locate the exact path of the upgrade file. Firmware Directory Locate the directory which the upgrade file belongs to. 3. Click Browse to select the upgrade file. 4. Click Upgrade. 11.8 View Open Source Software License Go to Configuration →...

  • Page 100: Synchronize Time By Satellite

    Network Speed Dome & Positioning System User Manual 11.10.2 Synchronize Time by Satellite Note This function varies depending on different devices. Steps 1. Enter Configuration → System → System Settings → Time Settings. 2. Select Satellite Time Sync.. 3. Set Interval. 4.

  • Page 101: Set Rs-485

    Network Speed Dome & Positioning System User Manual 11.11 Set RS-485 RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data between the device and the computer or terminal when the communication distance is too long. Before You Start Connect the device and computer or terminal with RS-485 cable.

  • Page 102: Set Ip Address Filter

    Network Speed Dome & Positioning System User Manual WEB Digest Algorithm MD5, SHA256 and MD5/SHA256 encrypted algorithm in WEB authentication. If you enable the digest algorithm except for MD5, the third-party platform might not be able to log in to the device or enable live view because of compatibility.

  • Page 103: Set Https

    Network Speed Dome & Positioning System User Manual Forbidden MAC addresses in the list cannot access the device. Allowed Only MAC addresses in the list can access the device. 4. Edit the MAC address filter list. Add a new MAC address to the list. Modify Modify the selected MAC address in the list.

  • Page 104: Set Qos

    Network Speed Dome & Positioning System User Manual and troubleshoot the security events. Steps Note This function is only supported by certain camera models. 1. Go to Configuration → System → Maintenance → Security Audit Log. 2. Select log types, Start Time, and End Time. 3.

  • Page 105: Set Ieee 802.1X

    Network Speed Dome & Positioning System User Manual Note Network can identify the priority of data transmission. The bigger the DSCP value is, the higher the priority is. You need to set the same value in router while configuration. 3. Click Save. 11.12.7 Set IEEE 802.1X You can authenticate user permission of the connected device by setting IEEE 802.1X.

  • Page 106: Certificate Management

    Network Speed Dome & Positioning System User Manual viewing live image) to the device via web browser within the set timeout period. Go to Configuration → System → Security → Advanced Security to complete settings. 11.12.10 Certificate Management It helps to manage the server/client certificates and CA certificate, and to send an alarm if the certificates are close to expiry date, or are expired/abnormal.
  • Page 107 Network Speed Dome & Positioning System User Manual The certificate request details are displayed in a pop-up window. 6. Copy the request content and save it as a request file. 7. Send the file to a trusted-third party for signature. 8.

  • Page 108: User And Account

    Network Speed Dome & Positioning System User Manual Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Configuration → System → Security → Certificate Management. 2. Input Certificate ID. Note The input certificate ID cannot be the same as the existing ones. 3.
  • Page 109 Network Speed Dome & Positioning System User Manual different user levels. Caution To increase security of using the device on the network, please change the password of your account regularly. Changing the password every 3 months is recommended. If the device is used in high-risk environment, it is recommended that the password should be changed every month or week.
  • Page 110 Network Speed Dome & Positioning System User Manual users. Simultaneous Login The administrator can set the maximum number of users logging into the system through web browser simultaneously. Go to Configuration → System → User Management, click General and set Simultaneous Login.

  • Page 111: Device Command

    Network Speed Dome & Positioning System User Manual A. Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for all Hikvision network cameras.

  • Page 112: Device Communication Matrix

    Network Speed Dome & Positioning System User Manual B. Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikvision network cameras.
  • Page 113 UD24709B-B...

This manual is also suitable for:

Ds-2dy7236ix-at5Ds-2dy5225ix-aeDs-2dy5225ix-aet5Ds-2dy5225ix-dmDs-2dy5225ix-dmt5Ds-2df6c431-cx ... Show all

Table of Contents