Smart Light; Functions; Motion Det; Privacy - HIKVISION DS-2CE10HFT-E User Manual

between two frames besides processing the noise in
one frame. The noise will be much less and the video
will be clearer.
MIRROR
OFF, H, V, and HV are selectable for mirror.
OFF: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and
vertically.

3.4 SMART LIGHT

Under the SMART LIGHT sub-menu, you can set the
mode to OFF or AUTO.
 OFF
Set it to OFF to give up this function.
AUTO

You can set THRESHOLD and LEVEL in this section.

3.5 FUNCTIONS

3.5.1 MOTION DET

MOTION DET refers to motion detection. With motion
detection feature, motion can be detected in any part
of a camera's view. You can configure full screen or a
number of zones in a camera's view where motion is to
be detected.

3.5.2 PRIVACY

This function allows you to block or mask certain area
of a scene, for preventing the personal privacy from
recording or live viewing. You can turn on/off the
PRIVACY to meet your needs.

3.6 FACTORY DEFAULT

Reset all the settings, except for image mode, to factory
defaults.

3.7 EXIT

Move the cursor to EXIT and click Iris+ to exit the menu.
3.8 SAVE & EXIT
Move the cursor to SAVE & EXIT and click Iris+ to save
the settings, and exit the menu.
Figure 3-5 SMART LIGHT
11
UD20697B