Table of Contents
Advertisement
4.5.5 Setting/Calling a Pattern
Purpose:
A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be called on the
pattern settings interface. There are up to 4 patterns for customizing.
Note:
Pattern function varies depending on different camera models.
Setting a Pattern:
Steps:
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Figure 4-10.
3. Click
to enable recording the zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the information of
PROGRAM PATTERN REMAINNING MEMORY (%) is displayed on the screen.
Zoom in or out.
Refocus the lens.
5. Click
to save all the pattern settings.
Buttons on the Patterns interface:
Buttons
© Hikvision
to enter the pattern settings interface.
Figure 4-10 Patterns Settings Interface
Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.
Advertisement
Table of Contents
