Table of Contents
Advertisement
6.
You can copy the settings to other alarm outputs.
7.
Click
5.2.5 Handling Exception
The exception type can be HDD Full, HDD Error, Network Disconnected, IP Address Conflicted and
Illegal Login.
Steps:
1.
Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Section 5.2.1
Configuring Motion Detection.
© Hikvision
Figure 5-18 Alarm Output Settings
to save the settings.
Advertisement
Table of Contents
