Camera Configuration; Setting Via Attribute Tree - HIKVISION MV-CA003-30GC User Manual

3) In the pop-up window, you can edit the IP address of the camera. For Static
IP type, you can also edit the subnet mask and default gateway.
Figure 2-4 Camera Network Parameters Setting (3)
4) Click OK to save the settings.

2.3 Camera Configuration

Note: Configure the camera via the control client. There two methods available: setting via the
attribute tree or via the menu bar.

2.3.1 Setting via Attribute Tree

The software can read the XML file of camera attributes and display it in tree format.
Steps:
1. Double click the MVS icon to open the client software. The main user
interface and the description of the client software are shown in Figure 2-5 and
Table 2-1.
User Manual of Area Scan GigE Camera
40