Mitsubishi 900 Series User Manual page 73

8 EMC DIRECTIVE
GOT side
130
(5.12)
Within 250
(9.84)
• When using a CC-Link dedicated cable between GOT and PLC
GOT side
130
(5.12)
Within 230
(9.06)
• When using a CC-Link dedicated cable between GOT and GOT
GOT side
130
(5.12)
Within 230
(9.06)
8 - 13
(b) For RS-422 cable (AC30/100/300R4-25P, User created cable)
Refer to the GOT-A900 series User's Manual (GT Works Version 5/GT
Designer Version 5 compatible Connection System Manual) for information
about the cable creation method.
• Wrap the cable shield material around the cable, so that the back aluminum
foil side (shield side) of the cable shield material is exposed at both ends of
the cable.
Ferrite core
(ZCAT3035-1330)
Cable shield material*1
1 The back aluminum foil side of the cable shield material (shield side)
should be exposed. (Refer to section 8.3.2 (1) (b))
(4) CC-Link Connection
(a) For CC-Link dedicated cable
• Peel the sheath (with the length shown below) at both ends of the cable,
and expose the shield braided wire for grounding.
Ferrite core
(ZCAT3035-1330)
40
(1.57)
Ferrite core
(ZCAT3035-1330)
40
(1.57)
(PLC CPU side connector varies depending on the cable used.)
40
(1.57)
40
(1.57)
MELSEC-GOT
PLC CPU side
130
(5.12)
Within 400
Unit : mm (inch)
(15.75)
PLC side
130
(5.12)
Within 400
Unit : mm (inch)
(15.75)
GOT side
130
(5.12)
Within 230
Unit : mm (inch)
(9.06)
8 - 13