Mitsubishi 900 Series User Manual page 70

8 EMC DIRECTIVE
1 The back aluminum foil side of the cable shield material (shield side) should be exposed.
GOT side
130
(5.12)
Within 230
(9.06)
GOT side
130
(5.12)
Within 250
(9.84)
8 - 10
The aluminum foil
side is exposed.
(2) CPU Direct Connection
(a) For RS-232C cable (QC30R2)
• Peel the sheath (with the length shown below) at both ends of the cable,
and expose the shield braided wire for grounding.
Ferrite core
(ZCAT3035-1330)
40
(1.57)
(b) For RS-422 cable (AC30/100/300R4-25P)
• Peel the sheath (with the length shown below) at both ends of the cable,
and expose the shield braided wire for grounding.
Ferrite core
(ZCAT3035-1330)
Cable shield material*1
1 The back aluminum foil side of the cable shield material (shield side)
should be exposed. (Refer to section 8.3.2 (1) (b))
Aluminum foil side
Cable Shield material
PLC CPU side
130
(5.12)
Within 300
40
(1.57) (11.81)
PLC CPU side
130
(5.12)
Within 400
(15.75)
MELSEC-GOT
Unit : mm (inch)
Unit : mm (inch)
8 - 10