Memory Board (A956Wgot Only); Memory Board Types; Mounting Procedure - Mitsubishi 900 Series User Manual

6 HANDLING

6.3 Memory board (A956WGOT only)

6.3.1 Memory board types

6.3.2 Mounting procedure

6 - 8
The memory board is used to store the optional function OS program (ladder
monitoring function, recipe function, speech output function, etc.) and to increase the
built-in memory capacity.
The following memory board types are available.
Type
A9GT-FNB Exclusively used for optional function OS storage
A9GT-FNB1M For optional function OS storage + built-in memory extension, 1M byte
A9GT-FNB2M For optional function OS storage + built-in memory extension, 2M byte
A9GT-FNB4M For optional function OS storage + built-in memory extension, 4M byte
A9GT-FNB8M For optional function OS storage + built-in memory extension, 8M byte
A9GT-QFNB Exclusively used for optional function OS storage
(MELSEC-Q Ladder monitor compatible)
A9GT-QFNB4M For optional function OS storage + built-in memory extension, 4M byte
(MELSEC-Q Ladder monitor compatible)
A9GT-QFNB8M For optional function OS storage + built-in memory extension, 8M byte
(MELSEC-Q Ladder monitor compatible)
When using the ladder monitor function, use the A9GT-QFNB (4/8M).
Description
1) Open the slot cover on the back of the
A956WGOT
2) Mount the memory board in the slot for
mounting a memory board.
Be careful not to touch the board inside the
GOT main body by hand when mounting the
memory board.
3) Fix by tightening the mounting screws of the
memory board within the specified torque
range.
4) Close the slot cover.
MELSEC-GOT
6 - 8