Mitsubishi 900 Series User Manual page 23

2 SYSTEM CONFIGURATION
Component
AC06B
AC12B
AC30B
AC50B
AC12B-R
AC30B-R
AC50B-R
A1SC07B
A1SC12B
A1SC30B
A1SC50B
A8GT-C12NB
Bus connection cable
A8GT-C30NB
A8GT-C50NB
A8GT-C100EXSS
A8GT-C200EXSS
A8GT-C300EXSS
A8GT-C100BS
A8GT-C200BS
A8GT-C300BS
A370C12B
A370C25B
A9GT-J2C10B
AC30R4-25P
AC100R4-25P
RS-422 cable
AC300R4-25P
QC30R2
AC30R2-9P
AC30R2-9SS
AC30R2
RS-232C cable 3
AC30N2A
Printer cable 5 AC30PIO-20P
SW D5C-
GTWORKS-E
Compatible software
package
SW D5C-GOTR-
PACKE
1 The printer of ESC/P raster specifications such as the PM series cannot be connected and used with the GOT.
2 The RS-422/RS-232C cable for use between GOT and computer link module should be fabricated on the user side by referring to the
[GOT-A900 Series User's Manual (GT Works Version5/GT Designer Version5 compatible Connection System Manual)].
3 The RS-232C cable may be fabricated by the user.
For details of the cable specifications, refer to the [GT Works Version5/GT Designer Version5 Reference Manual].
4 Please refer to the [GOT-A900 Series User's Manual (GT Works Version5/GT Designer Version5 compatible Connection System
Manual)] and prepare the RS-232C cable between the GOT and the power supply unit of the bar code reader. (Some bar code readers
do not need to be connected with the RS-232C cable.)
5 The printer cable may be fabricated by the user.
Refer to [A9GT-50PRF type Printer interface module User's Manual] for full information on the specifications needed to fabricate the
cable.
2 - 6
Type
Cable length 0.6m
Cable length 1.2m
Cable length 3.0m
Cable length 5.0m
Right angle, cable length 1.2m
Right angle, cable length 3.0m
Right angle, cable length 5.0m
Cable length 0.7m
Cable length 1.2m
Cable length 3.0m
Cable length 5.0m
Cable length 1.2m
Cable length 3.0m
Cable length 5.0m
Cable length 10.0m
Cable length 20.0m
Cable length 30.0m
Cable length 10.0m
Cable length 20.0m
Cable length 30.0m
Cable length 1.2m
Cable length 2.5m
Cable length 1.0m
Cable length 3m (D-sub 25-pin at both ends)
Cable length 10m (D-sub 25-pin at both ends)
Cable length 30m (D-sub 25-pin at both ends)
For connection between GOT and computer link module
Cable length 3m
Cable length 3m (D-sub 9-pin, D-sub 25-pin)
Cable length 3m (D-sub 9-pin at both ends)
Cable length 3m (D-sub 25-pin at both ends)
Cable length 3m (D-sub 25-pin at both ends)
For connection between GOT and computer link module
For connecting the GOT with the power supply unit of the bar code reader
Cable length 3m
Compatible with Microsoft
operating system, Microsoft
Remarks
For connection between large type base
unit and A7GT-CNB
For connection between GOT and GOT
For connection between small type base
unit and GOT
For connection between GOT and GOT
For connection between large type base
unit and GOT
For connection between small type base
unit and GOT
For connection between A7GT-CNB and
GOT
For connection between GOT and GOT
For connection between motion controller
CPU and GOT
For connection between A0J2HCPU and
GOT
For connection between GOT and
A/QnACPU
For connection between GOT and
FXCPU
For connection between GOT and QCPU
For connection between GOT and
personal computer for data transfer
For connection between GOT and
personal computer for data transfer
(9-pin conversion connector required)
For connection between GOT and printer
R R
Windows 95 operating system, Microsoft
R R
Windows NT Workstation 4.0 operating system
MELSEC-GOT
2
2
4
R R
Windows 98
2 - 6