Table of Contents
Advertisement
2.
MOUNTING THE HYDRAULIC CONTROL VALVE
1)
Refer to Figures 9-12 for typical placement of the Hydraulic Control Valve.
2)
Valve is to be mounted with motor in the upright position.
3)
Connect the product cable connectors to hydraulic control valve and encoder(s). If applicable, also
connect fan sensor, bin level sensor, clutches, and boom vlves.
OPEN HYDRAULIC SYSTEM (FIXED DISP. PUMP)
FIGURE 9
OPEN HYDRAULIC SYSTEM (FIXED DISP. PUMP)
FIGURE 11
SPINNER SYSTEM
CLOSED HYDRAULIC SYSTEM (VARIABLE DISP. PUMP)
PNEUMATIC SYSTEM
CLOSED HYDRAULIC SYSTEM (VARIABLE DISP. PUMP)
35
FIGURE 10
FIGURE 12
Advertisement
Table of Contents
