The Overview Of The Vf-S15 Parameter - Toshiba PNE001Z Function Manual

5.5. The overview of the VF-S15 parameter

Refer to a communication functional description (E6581913) for details.
5.5.1. fa06 (Communication command1)
bit Function
Preset speed operation
0
frequencies 1
Preset speed operation
1
frequencies 2
Preset speed operation
2
frequencies 3
Preset speed operation
3
frequencies 4
Motor selection (1 or 2)
4
(THR 2 selection)
5 PI D control
Acceleration/decele-
ration pattern selection
6
(1 or 2)
(AD2 selection)
7 DC braking
8 Jog run
Forward/reverse run
9
selection
10 Run/stop
11 Coast stop command
12 Emergency stop
13 Fault reset
Frequency priority
14
selection
Command priority
15
selection
* VF-S15: When 14(sr0) is set to fmod, preset speed operation frequency 0 is selected.
0 1
Preset speed operation is disabled
or preset speed operation
frequencies (1-15) are set by
specifying bits for preset speed
operation frequencies 1-4.
(0000: Preset speed operation OFF,
001-1111: Setting of preset speed
operation frequencies (1-15)
Motor 1 Motor 2
(THR 1) (THR 2)
Normal operation PI D off
Acceleration/dec
Acceleration/decel
eleration pattern
eration pattern 1
2
(AD1)
(AD2)
Forced DC
OFF
braking
OFF Jog run
Forward run Reverse run
Stop Run
Standby Cost stop
OFF Emergency stop
OFF Reset
OFF Enabled
OFF Enabled
- 29 -
E6582051
Note
THR 1: pt = setting value, thr
THR 2: pt = 0, f170, f171,
f172, f173
-
AD1: acc, dec
AD2: f500, f501
-
-
-
-
-
Always enable, "E" trip
No data is returned from the drive
Enabled regardless of the setting
of fmod
Enabled regardless of the setting
of cmod