Module Parameter Setting - Toshiba nv Series Instruction Manual

3.2 Setting with the Engineering Tool

3.2.1 Module parameter setting

Set the parameters of the SA9A1 in the following steps.
Register the SA9A1 module from the station tree
Select I/O node under PU821 in the station tree and select ［File］-［New (W)］.
Select a I/O node number and select SA9A1 from Node Catcode and click the
OK button.
Figure 3-5 Module registration screen
Figure 3-6 Node Catecode select screen
25
Unified Controller nv series type2 SOE Function Instruction Manual