Network Parameter Setting; Modbus Station Address - Toshiba MD911 Instruction Manual

Chapter 3 Setting
3.2

Network Parameter Setting

The network parameters can be set with the operation mode setting switches and
MODBUS station address setting switches.
For methods to set these switches, refer to "Table 3-1 Station address setting" and
"Table 3-2 Operation mode setting table."
For the MD911 module, the following network parameters must be set.
3.2.1

MODBUS station address

For MODBUS, the station address setting switch is used to set the address on the
MODBUS network.
The address on the MODBUS network can be set to any value provided that the
value must be unique in the system. The available range of addresses is
01h-FFh (1-255).
The address can be set in MD911 parameter setting in the engineering tool.
Set the value set with the address setting switch to the station number of the
module parameter.
20
6F8C1399
 MODBUS station address