Version With "Force Amplification Cylinder" (Kvz) - SCHUNK DPG-plus Series Assembly And Operating Manual

Sealed 2-finger parallel gripper
Table of Contents

Advertisement

7.6.4 Version with "force amplification cylinder" (KVZ)

28.00 | DPG-plus | Assembly and Operating Manual | en | 389031
Position of the item numbers:
• Previous version:
• Successor version:
Dismantling
Remove the compressed air hose.
Ø
Unfasten and remove the screws (47).
Ø
Previous version: Remove the cover (5) and seal (37/20).
Ø
Successor version: Remove the cover (5) and flat seal (20).
Mark the installation positions of the piston (3/8), the base jaws
Ø
(2/7) and the side cover (12) on the housing (1).
Previous version: Unscrew screws (42). Remove the side
Ø
cover (12) and the gasket (14).
For DPG-plus 240 / 300: Remove O-ring (39).
Successor version: Unscrew and remove screws (42), remove
the side cover (12) and the flat seal ring (39).
IMPORTANT! Do not disassemble the filler piece (18) for
maintenance purposes, as the product may leak. If the filler
piece (18) is nevertheless disassembled, seal the filler piece
(18) with liquid sealant on reassembly.
Unscrew and remove the screws (41) and remove the cover (4).
Ø
Unscrew the screw (40/45) and remove the cylinder
Ø
piston (10/6) from the intermediate housing (65).
Remove the intermediate housing (65).
Ø
Previous version: Mark the installation position between the
Ø
cylinder piston  (60) and the housing (1).
Successor version: Mark the installation position between the
cylinder piston (71) and the housing (1).
Remove the intermediate piston (66).
Ø
Previous version: Remove the second cylinder piston (60) from
Ø
the housing (1).
Successor version: Remove the second cylinder piston (71) from
the housing (1).
Push the pistons (3/8) upwards out of the housing (1).
Ø
NOTE
Do not disassemble the intermediate jaw (13) from the base jaw
(2/7).
Pull the base jaws (2/7) out of the housing (1).
Ø
Loosen the screw (43) and disassemble the intermediate
Ø
jaw (13) from the base jaw (2/7).
Assembly drawing (previous version)
Assembly drawing (successor version)
Maintenance
[
 65]
}
[
}
 68]
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents