7.4.5 Version with power booster cylinder (KVZ) without gripping
13.00 | PGN-plus | Assembly and Operating Manual | en | 389296
force
Position of the item numbers:
1.
Remove the compressed air hoses.
2.
Remove the cover (5).
3.
Mark the installation position of the piston (3/8) and the base
jaws (2/7) in the housing (1).
4.
Unscrew the screws (41) and remove the cover (4).
5.
Unscrew the screw (51) and remove the cylinder piston (6)
and spacer piston (66) from the intermediate housing (65).
6.
Unscrew the screws (46/54) and remove the intermediate
housing (65).
7.
Remove the second cylinder piston (6) from the housing (1).
8.
Press the piston (3/8) upwards out of the housing (1).
9.
Pull the base jaws (2/7) out of the housing (1).
} 7.7.3 [/ 70]
Maintenance
61