Connection Schematic Examples - mikroElektronika mikroProg for PIC Manual

Following examples demonstrate
connections with some of the most
popular supported MCUs. For all other
MCUs consult manufacturer's datasheet.
All PIC, dsPIC and PIC32 MCUs use PGC, PGD
and MCLR/Vpp pins for programming. Some MCUs
have several groups of programming pins. For example
dsPIC33FJ128GP710A has three pairs of programmable
pins PGED1-PGEC1, PGED2-PGEC2 or PGED3-PGEC3 (MCLR/Vpp
pin is same for all pin groups). Which ever group of programming
pins you decide to use, make sure to connect each pin properly.
PGC - Serial programming clock
PGD
- ICSP data
MCLR/Vpp - Master clear/Programming voltage
Also it is necessary to attach power supply to microcontroller VCC and GND pins.
Page 18