Introduction; Purpose Of This Documentation; Document History; Items Supplied - Siemens SITRANS MAG 1100 Operating Instructions Manual

Introduction

1.1

Purpose of this documentation

1.2

Document History

1.3

Items supplied

www.eltra-trade.com
These instructions contain all information required to commission and use the device. Read
the instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to each
previous edition.
Edition Remarks
08/2018 Corrections to dimensions and weight
01/2018 The Operating Instructions now includes MAG 1100 F
Updated introduction
05/2016 Updated connecting/remote installation
Updated dimension-dependent factory settings
Updated coil resistance table
02/2011 First edition
The Operating Instructions replaces:
● MAG 1100 part of SITRANS F M HANDBOOK (A5E02435647)
● SITRANS F M MAG 1100 DN 2- DN 100
● SITRANS F M MAG 1100 DN 2- DN 3
● SITRANS F M MAG 1100/1100 F
● Calibration report
● DVD with documentation and cerificates
● Safety Note
info@eltra-trade.com
1
5
+421 552 601 099