Siemens SITRANS MAG 1100 Operating Instructions Manual page 38

Connecting
5.2 Remote installation
1. Unscrew and remove terminal box lid.
2. Mount the two terminal blocks as shown and insert electrode cable plug
3. Remove SENSORPROM
4. Fit the ½" NPT or M20 cable glands for supply and output cables.
36
www.eltra-trade.com
0 and 83) and coil cable plug
Terminals electrode cable: 82, 0 and 83
Terminals special electrode cable: 84, 83, 0, 82 and 81
Terminals coil cable: 85; 86
Note
Special electrode cable
Special electrode cable must be connected to terminals 84, 83, 0, 82 and 81.
Figure 5-1 Terminal box without blocks
®
see relevant transmitter operating instructions.
②
(terminals 85 and 86).
unit from sensor and mount it on connection plate in transmitter,
info@eltra-trade.com
①
(terminals 82,
+421 552 601 099