Grandstream Networks GRP2615 Administration Manual page 61

Time Display Format
Show Date on Status
Bar
Settings → Preferences → Language
Display Language
Default Input Selection
Auto language
download
Settings → Preferences → LCD Display
Backlight Brightness:
Active
Backlight Brightness:
Idle
Active Backlight
Timeout
Disable Missed Call
Backlight
•
yyyy-mm-dd: 2019-03-02
•
mm-dd-yyyy: 03-02-2019
•
dd-mm-yyyy: 02-03-2019
•
dddd, MMMM dd: Saturday, March 02
•
MMMM dd, dddd: March 02, Saturday
The default setting is yyyy-mm-dd.
Configures the time display in 12-hour or 24-hour format on the LCD. The
default setting is in 12-hour format.
Allows users to display time and date on the top panel of the LCD screen.
Default setting is "No".
Selects display language on the phone. There are 21 languages can be set
as display language, user could also choose "Auto" or "Downloaded
Language" as display language. The default setting is "Auto".
Configures the default input selection.
•
Multi-Tap: multi-tap to switch character;
•
Shiftable: select input from available characters.
The default setting is "Multi-Tap".
This is used to configure the device to download language files automatically
from server. The default setting is "No".
Configures the LCD brightness when the phone is active. Valid range is 10
to 100 where 100 is the brightest. Default value is "100".
Configures the LCD brightness when the phone is idle. Valid range is 0 to
100 where 0 is off and 100 is the brightest. Default value is "60".
Allows user to set up the backlight time (in minutes). Valid range from 0 to
90. Default value is "1".
Note: When Active Backlight Timeout is set to 0, the backlight will be
constantly on.
Disables/enables LCD backlight when there is a missed call notification.
•
If set to "Yes", the screen will turn off the LCD backlight even if there
is a missed call on the phone.
•
If set to "Yes, but flash MWI LED", the phone will turn off LCD
backlight but MWI will not be deemed when there is a missed call.
•
If set to "No", the phone will not turn off LCD backlight when there is
a missed call.
The default setting is "No".
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 61