Grandstream Networks GRP2615 Administration Manual page 90

LDAP Version
LDAP Name Attributes
LDAP Number
Attributes
LDAP Display Name
Max. Hits
Search Timeout
Sort Results
LDAP Lookup
Lookup Display Name
Selects the protocol version (Version 2 or Version 3) for the phone to send
the bind requests. The default setting is "Version 3".
Specifies the "name" attributes of each record which are returned in the
LDAP search result. This field allows the users to configure multiple space
separated name attributes.
Example:
gn
cn sn description
Specifies the "number" attributes of each record which are returned in the
LDAP search result.
This field allows the users to configure multiple space separated number
attributes.
Example:
telephoneNumber
telephoneNumber Mobile
Configures the entry information to be shown on phone's LCD. Up to 3 fields
can be displayed.
Example:
%cn %sn %telephoneNumber
Specifies the maximum number of results to be returned by the LDAP server.
If set to 0, server will return all search results. The default setting is 50.
Specifies the interval (in seconds) for the server to process the request and
client waits for server to return. The default setting is 30 seconds.
Specifies whether the searching result is sorted or not.
Default setting is "No".
Configures to enable LDAP number searching when dialing and receiving
calls.
Configures the display name when LDAP looks up the name for incoming
call or outgoing call. This field must be a subset of the LDAP Name Attributes.
Example:
gn
cn sn description
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 90