Grandstream Networks GRP2615 Administration Manual page 55

Transfer Mode via VPK
Hold Call in Transfer
Show On Hold
Duration
Do Not Escape #
as %23 in SIP URI
Click-To-Dial Feature
Default call log type
Return Code When
Refusing Incoming
Call
Return Code When
Enable DND
Enable BLF Pickup
Screen
Enable BLF Pickup
Sound
BLF Pickup Sound
Except List
Perform "Blind Transfer", "Attended Transfer", or a "New Call" with the
specified number in the Value field when a user presses "Transfer" virtual
multiple-purpose key. Default is "Blind Transfer".
When set to "No", phone will neither hold the current call in transfer window
nor hold the call with the transfer target before referring the call in the
attended transfer. The default setting is "Yes".
Show the duration of holding a call on the LCD.
The default setting is "Yes".
Specifies whether to replace # by %23 or not for some special situations.
The default setting is "No".
Enables Click-To-Dial feature. If this feature is enabled, user could click the
green dial button on left top corner of phone's Web GUI, then choose
the account and dial to the target number. The default setting is "Disabled".
For more details refer to [CLICK-TO-DIAL].
Sets the default call log list after select MENU→CALL HISTORY.
Broadsoft Call Log or Local Call Log option will only show its own list. Default
option will keep both call log lists. The default setting is "Default".
When refusing the incoming call. The phone will send the selected type of
SIP message of the call. Available options are:
•
Busy (486).
•
Temporarily Unavailable (480).
•
Not found (404).
•
Decline (603).
Default setting is "Busy 486".
When DND is enabled, the phone will send the selected type of SIP
message. Available options are:
•
Busy (486).
•
Temporarily Unavailable (480).
•
Not found (404).
•
Decline (603).
Default setting is "Temporarily Unavailable (480)".
By enabling BLF Pickup Screen, when monitored BLF is ringing, GRP2615
will pop up a BLF information window. The default setting is "No".
Gives the user the ability to set sound notification to the monitoring BLF line
when it's ringing, GRP2615 will play a sound to inform user. The default
setting is "No".
Configures the list to be playing BLF sound notification for "All Except"
extensions in the list [BLF Pickup Sound Except List] or "Only Allow"
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 55