Grandstream Networks GRP2615 Administration Manual page 77

Enable CDP
Enable LLDP
LLDP TX Interval
Maximum
Transmission Unit
(MTU)
Network → Remote Control
Action URI Support
Remote control Pop
up window support
Action URI allowed IP
list
CSTA Control
Network → Affinity Settings
Affinity Support
Preferred Account
Network → Bluetooth Settings
Bluetooth Power
Handsfree Mode
Bluetooth Name
Enables/Disables CDP "Cisco Discovery Protocol". The default setting is
"Enabled".
Controls the LLDP (Link Layer Discovery Protocol) service. The default
setting is "Enabled".
Defines LLDP TX Interval (in seconds). Valid range is 1 to 3600. The default
setting is "60".
Defines the MTU in bytes. The valid range is 576 – 1500. The default value
is 1500 bytes.
Enables/disables action URI feature on the phone.
The default setting is "Enabled".
Indicates whether the phone is enabled to pop up allow remote control.
The default setting is "Enabled".
List of allowed IP address from which the phone receives action URI. The
Allowed IP addresses
"192.168.1.1,192.168.1.2". Set this field to "any" to allow any IP address to
send Action URL to the phone. The default value is empty string which means
no IP address is allowed for remotely control the phone.
Indicates whether CSTA Control feature is enabled. Change of this
configuration will need the system to reboot to take effect. The default setting
is "Disabled".
Allows communication with GS Affinity CTI application to manage telephone
calls from computer. If enabled, a reboot is required to establish the
communication. Default is "Disabled".
GS Affinity CTI Application is available
Selects the account on which CTI support is enabled.
Configures Bluetooth to power "On", "Off" or "Off & Hide Menu From LCD".
If set "Off & Hide Menu From LCD", Bluetooth will be disabled, and users will
not find Bluetooth settings on phone LCD Menu, while if set to "No", Bluetooth
will be disabled, and Bluetooth Settings menu will be available, and user can
enable it. The default setting is "On".
Enable / disable Bluetooth handsfree feature. Default setting is "Off".
Specifies the Bluetooth device name.
GRP2615 Administration Guide
Version 1.0.0.31
are separated by a
HERE and its User Guide
comma such as
HERE.
P a g e | 77