Grandstream Networks GRP2615 Administration Manual page 25

•
Detect/connect UCM server to process auto-provision. Manually input the IP and
port of the UCM server phone wants to bind with; Or select from the available
UCM server in network.
•
•
Reboot Reboots the phone.
LCD. Lift and put back the handset to exit diagnostic mode.
Audio Loopback
o
Speak to the phone using speaker/handset/headset. If you can hear
your voice, your audio is working fine. Press "Exit" Softkey to exit
audio loopback mode.
LCD on/off
o
Selects this option to turn off LCD. Press any button to turn on LCD.
LCD Diagnostic
o
Enters this option and press Left/Right Navigation key to do LCD
Diagnostic. Press "Exit" Softkey to quit.
Certificate Verification
o
This is used to validate certificate chain for the server's certificate.
UCM Detect
Authentication
Admin Password
o
This is used to change the admin password for Web UI access.
End User Password
o
This is used to change end user password for Web UI access.
Settings
o
Turns on/off Test Password Strength feature. This will allow only
passwords with some constraints to ensure better security.
Operations
Factory Reset
o
It is used to restore the phone to factory default settings.
Ping and Traceroute
o
It is used to show the route taken by packets across to an URL.
Alternative firmware
o
It is used to show current and alternative firmware versions available on
the phone. Users can "rollback" to alternative firmware from this menu.
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 25