Grandstream Networks GRP2615 Administration Manual page 86

The default setting is "HTTP".
Enable User Web Administrator can disable or enable user web access. The default setting is
Access "Enabled".
Configures the HTTP port under the HTTP web access mode. The valid range
HTTP Web Port
is 80 – 65535. The default value is "80".
Configures the HTTPS port under the HTTPS web access mode. The valid
HTTPS Web Port
range is 443 – 65535. The default setting is "443".
Disables SSH access.
Disable SSH
The default setting is "No".
This option allows you to use authentication keys for SSH access. The public
key should be loaded to phone's web UI while the private key should be used
SSH Public Key
in the SSH tool side.
Note: This will allow upcoming SSH access without password.
Specifies the time in minutes that the web or LCD login interface will be locked
Web/Keypad/Restrict
out to user after five login failures. This lockout time is used for web login,
mode Lockout
STAR keypad unlock, and LCD restrict mode admin login. Range is 0-60
Duration
minutes. The default setting is "5".
Web Session Configures timer to logout web session during idle. The valid range is 2-60 min.
Timeout The default value is 10 min
Web Access Attempt Configures attempt limit before lockout. The valid range is 1 – 10. The default
Limit value is "5".
Maintenance → Security Settings→ Trusted CA Certificates
Allows to upload and delete the CA Certificate file to phone.
Trusted CA
Certificates Note: Users can either upload the file directly from web or they can choose to
(1 – 6) provision it from their cfg.xml file.
Phone will verify the server certificate based on the built-in, custom or both
Load CA Certificates
trusted certificates list. The default setting is "Default Certificates".
Maintenance→Security Settings→ Keypad Lock
If set to "Yes" the keypad can be locked either manually by pressing for 4
Enable Keypad seconds * key or pressing a VPK which set to "keypad lock" mode, also the
Locking keypad will be locked automatically after the configured timer. The default
setting is "No".
•
Keypad Lock Type
•
•
HTTP
•
Disabled
•
Both HTTP and HTTPS
If set to "Functional Keys", only "Functional Keys" will be locked but you
are still allowed to dial out emergency calls
If set to "All Keys", all keys will be locked and no emergency calls are
allowed.
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 86