Grandstream Networks GRP2615 Administration Manual page 46

Hide Dialing Password
Disable Call Waiting
Ringtone
Account Ring Tone
Match Incoming Caller
ID
Ring Timeout
Account x → Intercom Settings
Allow Auto Answer by
Call-Info/Alert-Info
Allow Barging by Call-
Info/Alert-Info
Mute on answer
Intercom call
Allows users to hide the password when the dialing number matches the
configured prefix.
Enables / disables the call waiting feature for the current account. When set
to "Default", global call feature setting will be used. Default value is "Default".
Allows users to configure the ringtone for the account. Users can choose
from different ringtones from the dropdown menu.
Note: User can also choose silent ring tone.
Specifies matching rules with number, pattern or Alert Info text (up to 10
matching rules). When the incoming caller ID or Alert Info matches the rule,
the phone will ring with selected distinctive ringtone. Matching rules:
•
Specific caller ID number. For example, 8321123;
•
A defined pattern with certain length using x and + to specify, where x
could be any digit from 0 to 9. Samples:
xx+ : at least 2-digit number;
xx : only 2-digit number;
[345]xx: 3-digit number with the leading digit of 3, 4 or 5;
[6-9]xx: 3-digit number with the leading digit from 6 to 9.
•
Alert Info text
Users could configure the matching rule as certain text (e.g., priority) and
select the custom ring tone mapped to it. The custom ring tone will be
used if the phone receives SIP INVITE with Alert-Info header in the
following format: Alert-Info: <http://127.0.0.1>; info=priority
Selects the distinctive ring tone for the matching rule. When the incoming
caller ID or Alert Info matches one of the 10 rules, the phone will ring with
the associated ringtone.
Defines the timeout (in seconds) for the rings on no answer. The default
setting is 60. The valid range is from 10 to 300.
Allows the phone to automatically turn on the speaker phone to answer
incoming calls after a short reminding beep when enabled, based on the SIP
Call-Info/Alert-Info header sent from the server/proxy. Default is "Yes".
When enabled, the phone will automatically put the current call on hold and
answer the incoming call based on the SIP Call-Info/Alert-Info header sent
from the server/proxy. However, if the current call was answered based on
the SIP Call-Info/Alert-Info header, then all other incoming calls with SIP Call-
Info/Alert-Info headers will be rejected automatically. Default setting is "No".
When enabled, the phone will mute the incoming intercom call. The default
value is "No".
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 46