Grandstream Networks GRP2615 Administration Manual page 63

Disable VM/MSG
power light flash
BLF LED Pattern
Explanation Form
Settings → Ringtone
Call Progresses
Tones:
• System Ring Tone
• Dial Tone
• Second Dial Tone
• Message Waiting
• Ring Back Tone
• Call-Waiting Tone
• Busy Tone
• Reorder Tone
Call Waiting Tone Gain
Speaker Ring Volume
Notification Tone
Volume
Lock Speaker Volume
Default Ringtone
Settings → Programmable Keys → Virtual Multi-Purpose Keys Settings
Idle Screen Settings
The VM/MSG light cannot flash even though there's an unread voice mail or
message when set to "Yes". Default settings is "No".
Users could view the color and pattern of the LED status based on the BLF
status update.
Configures ring or tone frequencies based on parameters from local telecom.
The default value is North American standard. Frequencies should be
configured with known values to avoid uncomfortable high pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in 'ms') while OFF is the period of
silence.
In order to set a continuous ring, OFF should be zero. Otherwise it will ring
ON ms and a pause of OFF ms and then repeat the pattern. Up to three
cadences are supported.
Configures the call waiting tone gain to adjust call waiting tone volume (Low,
Medium or High). The default setting is "Low".
Configures speaker ring volume. The valid range is 0 to 7.
The default setting is 5.
Configures notification tone volume.
The valid range is 0 to 7 and default setting is 5.
Lock volume adjustment when the option is enabled so it cannot be changed
from phone LCD. The option can be set to: "No", "Ring", "Talk" or "Both".
Default setting is "No".
Allows to set Default Ringtone as their Global ringtone.
Note: The ring tone set in individual accounts have higher priority to this
setting. If the user wants the default ring tone to be used globally, he needs
to set the ring tone of each account to Default Ring Tone; Otherwise, it will
be whichever the ring tone you set.
Important: The Priority goes as: Contact Ring Tone → Account Ring Tone
→ Default Ring Tone.
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 63