Grandstream Networks GRP2615 Administration Manual page 32

Password
Name
Voice Mail Access
Number
Picture
Account Display
Account x → Dial Plan
Name
Rule
Type
Account x → Network Settings
DNS Mode
(SIP) server before the account can be registered.
After it is saved, this will appear as hidden for security purpose.
The SIP server subscriber's name (optional) that will be used for Caller ID
display.
This parameter allows you to access voice messages by pressing the
MESSAGE button on the phone. This ID is usually the VM portal access
number. For example, in UCM6xxx IPPBX, *97 could be used.
Specifies account's picture that will be sent to the caller/callee when making
calls.
This option allows you to configure how your SIP account label will be
displayed on the phone's screen.
If set to "User Name", LCD account label will display the Account Name
configured for this SIP account. If set to "User ID", it will then display the SIP
User ID configured for this SIP account.
Enter the name for the configured rules.
Enter the rule settings (number pattern, prefix to add ...etc).
Choose the type of the rule (pattern, block, dial now, prefix & second tone).
This parameter controls how the Search Appliance looks up IP addresses
for hostnames.
There are four modes: A Record, SRV, NATPTR/SRV, Use Configured IP.
The default setting is "A Record".
If the user wishes to locate the server by DNS SRV, the user may select
"SRV" or "NATPTR/SRV".
If "Use Configured IP" is selected, please fill in the three fields below:
•
Primary IP
•
Backup IP 1
•
Backup IP 2
If SIP server is configured as domain name, phone will not send DNS query,
but use "Primary IP" or "Backup IP x" to send SIP message if at least one of
them are not empty.
Phone will try to use "Primary IP" first. After 3 tries without any response, it
will switch to "Backup IP x", and then it will switch back to "Primary IP" after
3 re-tries.
If SIP server is already an IP address, phone will use it directly even "User
Configured IP" is selected.
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 32