Grandstream Networks GRP2615 Administration Manual page 54

Disable in-call DTMF
Display
Enable Sending DTMF
via specific MPKs
Enable Active VPK
Page
Enable DND Feature
Mute Key Functions
While Idle
DND Override
Disable Transfer
In-call Dial Number on
Pressing Transfer Key
Attended Transfer
Mode
The default setting is "No".
Enables/disables the display of entered DTMF digits on the phone LCD
during the call.
The default setting is "No".
Allows certain MPKs to send DTMF in-call. This option doesn't affect Dial
DTMF.
The default setting is "No".
Enables Active VPK Page to be displayed on LCD when there are active
VPKs.
The default setting is "No".
If set to "No", the user cannot turn on Do Not Disturb feature via MUTE key,
MPK, or menu on LCD.
The default setting is "Yes".
Specifies the function of mute key in idle. Default setting is "DND".
When select "Idle Mute" and press Mute key while idle, the future incoming
call will be answered with mute. When select "Disabled", Mute key will not
take effect while idle.
The default setting is "DND".
Allows the phone to accept certain incoming calls while set to DND mode.
•
Off: all incoming calls will not be accepted.
•
Allow all: all incoming calls will be allowed.
•
Allow Only Contacts: only incoming calls from numbers in the local
phonebook will be accepted.
•
Allow Only Favorites: only incoming calls from favorite numbers in the
local phonebook will be accepted.
The default setting is "Off".
Enables/disables transfer feature. If disabled, call transfer will not be
possible. Default setting is "No".
Configures the number to be dialed as DTMF using TRANSFER button.
If set to "Static", attended transfers can only be performed with pre-
established calls. If set to "Dynamic", attended transfers can be performed
with pre-established calls OR be initiated during the transfer process. This
option does not affect the user's ability to perform blind transfers.
The default setting is "Dynamic".
For more details about "Static" / "Dynamic" transfer, refer to the user guide.
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 54