Directory - Grandstream Networks GRP2615 Administration Manual

Password to
Lock/Unlock
Keypad Lock Timer
Emergency
Maintenance → Packet Capture
Status
With RTP Packets
Maintenance → Tools
Provision
Factory Reset
Ping
Traceroute
Directory Page Definitions
Directory → Contacts
Search Bar
Add Contact
Edit Contact
Delete All Contacts
Directory → Group Management
Add Group
Edit Group
The default setting is "All Keys".
Set the password to Unlock the keypad.
Configure the idle screen timer after which the keypad will be automatically
locked. The valid range is 0 – 3600. The default value is "0".
Enter list of allowed emergency numbers when keypad is locked (separate the
numbers with ","). The default value is "112,911,110".
Displays packet capture status. When user starts to capture trace file, it will
show "RUNNING" status, otherwise, it will show "STOPPED".
Defines whether the packet capture file contains RTP or not. The default
setting is "No".
For more details, please refer to [GRP2615 TOOLS].
Allows users searching for phonebook entries.
Specifies Contact's First Name, Last Name, Phone Number, Accounts and
Groups Blacklist, Whitelist, Work, Friends and Family) to add one new
contact in phonebook.
Note: If the contact number belongs to Blacklist group, the call from this
number will be blocked. If the contact number belongs to Whitelist group,
when the phone is on DND mode, the call from whitelist number will be
allowed.
Edits selected contact.
Deletes all contacts from phonebook.
Note: a message prompt will be displayed so that users will confirm to delete
or cancel the operation, in order to prevent users from losing contacts when
deleting them accidentally.
Specifies Group's name to add new group. More than 30 Groups supported.
Edits selected group.
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 87