Grandstream Networks GRP2615 Administration Manual page 36

Callee ID Display
Caller ID Display
Add Auth Header on
Initial REGISTER
Allow SIP Reset
Ignore Alert-Info
header
Account x → SIP Settings → Custom SIP Headers
Use Privacy Header
reliability to SIP provisional responses (1xx series). This is very important to
support PSTN internetworking. To invoke a reliable provisional response, the
100rel tag is appended to the value of the required header of the initial
signaling messages. The default setting is "No".
Determines from where to locate callee ID to display or not on the phone.
•
Auto: The phone will update the callee ID in the order of P-Asserted
Identity Header, Remote-Party-ID Header and To Header in the 180
Ringing.
•
Disabled: Callee ID will be displayed as "Unavailable".
•
To Header: Callee ID will not be updated and displayed as To Header.
The default setting is "Auto".
Determines from where to locate caller ID to display or not on the phone
•
Auto: The phone will look for the caller ID in the order of P-Asserted
Identity Header, Remote-Party-ID Header and From Header in the
incoming SIP INVITE.
•
Disabled: All incoming calls are displayed with "Unavailable".
•
From Header: the phone will display the caller ID based on the From
Header in the incoming SIP INVITE.
The default setting is "From Header".
To define whether authorization Header will be added on initial REGISTER
from the first REGISTER. The default setting is "No".
This is used to perform a factory reset through SIP NOTIFY. When the phone
receives the NOTIFY with Event: reset, the phone should perform a factory
reset after the authentication. The default setting is "No".
This option is used to configure default ringtone. If set to "Yes", configured
default ringtone will be played. The default setting is "No".
Controls whether the Privacy header will present in the SIP INVITE message
or not, whether the header contains the caller info.
•
Default: The Privacy Header will show in INVITE only when "Huawei
IMS" special feature is on.
•
Yes: The Privacy Header will always show in INVITE.
•
No: The Privacy Header will not show in INVITE.
GRP2615 Administration Guide
Version 1.0.0.31
P a g e | 36