1-5) Placement Of Warning Stickers - SunStar SWF/C Series User Manual

1-5) Placement of
Warning Stickers
Open the upper shaft cover of
each head and supply the
designated oil.
Fire or death may be caused by
high voltage electric shock.
Don't open the cover except for
service man assigned by SWF.
When open the cover turn off
power and wait for 6 minutes.
Injury may be caused by winding.
Be sure to turn off the power
before cleaning, lubricating,
adjusting or repairing.
Physical damage may be
caused by winding.
Don't put your hands near the
arrow while the main shaft is
rotating
Physical injury may be caused
by crevice.
Don t put your finger in a groove
on the table.
Injury may be caused by moving
needle.
Ensure that the machine is in a
stop condition before changing,
threading or rethreading of
needies or changing of needles.
Physical damage may be caused
by interposition.
While embroidery frame is running
according to the direction of
embroidery frame may be injured
your hands by gap between fixed
body and embroidery frame.
Turn off the main power before
rotating the main shaft by hand!
Do not remove covers during
operation!
Turn off the main power before
opening electricity-related boxes!
Observe the directions on ALL warning stickers placed on the machine as
reminders for your safety.
1) Location of Warning Stickers
1-4
[Fig.1-3 Front]
[Fig.1-4 From top]