5-10) Floppy Disks - SunStar SWF/C Series User Manual

[CAUTION 1]
Winding the bobbin off-center or uneven as shown below can cause thread breaks, skipped stitches,
or thread tangles.
[CAUTION 2]
Too tight tension of the bobbin thread may block smooth pulling of the thread and cause thread breaks or
short tails.

5-10) FLOPPY DISKS

Make sure to meet the following guidelines when using floppy disks.
[CAUTION]
You can use pre-formatted disks, but be sure to use disks of recognized quality.
① Keep the disks away from objects with magnetic fields such as televisions.
② Protect the disks from excess heat, humidity, and direct sunlight.
③ Do not place heavy objects on the disks.
④ Do not remove the disk from the drive while formatting, reading, or writing the disk.
⑤ Do not open the cover of the disk drive.
⑥ Data cannot be written onto the write-protected disks.
⑦ Repetitious reading and writing on a single disk may cause errors.
⑧ Save your important data on more than one disk for back-up.
Shutter
Protection tab
[Fig.5-24]
5-15
[Fig.5-23]