(2) Moving Frame Before Embroidery Begins
Press
while the embroidery information is displayed on the menu screen.
When the cursor is in "A/BSTART POINT", press
Enter the value within the range and press
Selecting Polyester Thread Mode
When all the values of "A/BSTART POINT" are set higher than 30, the polyester thread mode is chosen. This
could prevent looping from occurring during embroidery.
1. ASTART POINT :
2. BSTART POINT :
. Then the following screen appears.
:
A-START POINT
RANGE : -10↔ ↔ 40
:
O
.
7-54
O
O
:
: