5-2) Emergency Power And Start/Stop Buttons - SunStar SWF/C Series User Manual

5-2) EMERGENCY POWER AND START/STOP BUTTONS

5-2-1) Emergency Power Switch
When starting the machine from initial stage,
① Turn on the main power ([Fig.5-4]).
② Press the emergency power switch (green color).
③ Emergency power switch will not turn on if the main power is off.
[NOTE]
Emergency power switch detects emergency stop failures and prevents accidents.
Emergency power function detects the failure of the emergency stop function and prevents the machine from
being switched on.
5-2-2) Start/Stop Buttons
Use the START and STOP buttons to:
Start the embroidery work or stop the machine during operation.
Move the frame back during machine stop.
Move forward in design during machine stop (non-stitching)
Move backward in design during machine stop (non-stitching)
Do work other than embroidery
5-4
Emergency power switch
[Fig.5-4]
[Fig.5-5]