8-7) Tape Reader And Communication; 8-8) Memory; 8-9) System Installation - SunStar SWF/C Series User Manual

8-7) TAPE READER AND COMMUNICATION

NO. ERROR MESSAGE
630 Read data error
640 Network system not found!

8-8) MEMORY

NO. ERROR MESSAGE
700 Memory file not found
701 System memory insufficient
702 Memory room full
703 Memory system error
704 Weakness of battery in memory

8-9) SYSTEM INSTALLATION

NO. ERROR MESSAGE
800 System file not found
ERROR
Error in data read from the tape
reader.
Network device is not connected.
ERROR
No embroidery data in the memory.
Not enough memory space for data
storage.
Memory is full.
Error during copying/deletion in
memory.
Memory saving battery is worn out
during power off.
ERROR
Disk for system installation was
not used.
8-3
CORRECTION
Re-input the data through the tape
reader.
Check the network connection.
CORRECTION
Save the data in memory using
disk or tape.
Delete unnecessary data.
Delete unnecessary data..
Reset or turn the power OFF and
ON again.
Contact the nearest SWF dealer
and replace it.
CORRECTION
Use the disk for system installation.