Functions And Features - SunStar SWF/C Series User Manual

FUNCTIONS AND FEATURES

01) EXPANDED MEMORY SIZE
The machine can store a maximum of 100 designs. The basic memory size is 2 million stitches.
02) MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
You can turn the design from 0°to 359°in the increments of 1°and also reverse the design in the X direction
(mirror image).
03) ENLARGING AND REDUCING DESIGN
You can reduce or enlarge the embroidery design in size from 50% to 200% by 1% along the X and Y axis.
04) AUTOMATIC SELECTION OF NEEDLE BAR
You can select the order of the needle bars up to the 99th bar.
05) GENERAL REPETITION WORK
The same design can be repeated up to 99 times along the X and Y axis.
06) AUTOMATIC OFFSET
The frame automatically returns to the offset point when the embroidery is finished to make it easier for you to
switch the frames. You can select AUTOMATIC OFFSET at PARAMETER SELECT MODE to move the frame
automatically to the desired point, making it easier to do appliques and to switch the frames.
07) MANUAL OFFSET
You can manually move the frame to the pre-selected point to do appliques or change the frames during embroidery
work. The frame can be moved back to its original place by simply pressing the right buttons.
08) RETURN TO START
The frame can be moved back to the start point of the design during the embroidery work.
09) NON-STITCHING
The frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10000 stitches and by color
without stitching.
10) FRAME REVERSAL
When the thread breaks or runs out of track, you can move the needle bar back to the starting point of the design in
the units of one to ten stitches.
11) AUTOMATIC TRIMMING
The automatic trimming function, determined by the design and the machine set-up, enhances work productivity and
quality of the finished product.
4-1
CHAPTER
4