SunStar SWF/C Series User Manual page 94

■ ■ SPEED CODE: Setting the speed in operation mode
Ex) Slowing down the speed while working on design from memory #5 (number of stitches: 18294) from STITCH 1000
to STITCH 2000
Stop the machine at STITCH 1000 by
pressing
Press to change the speed
code
Place the cursor at "2.LOW SPEED"
and press SET. Then press
PREVIOUS and start work. You will
be working at the speed pre-set at
SLOW SPEED in MACHINE
FUNCTION.
Press at STITCH 2000 to stop
the machine.
Press to change the speed
Place the cursor at "1.HIGH SPEED"
and press . Then press
and re-start work.
==== SPEED CODE SET
1. HIGH SPEED
2. LOW SPEED
3. RESET
==== SPEED CODE SET
1. HIGH SPEED
2. LOW SPEED
3. RESET
[CAUTION]
make sure that Angle, Enlarge/Reduce, X-Y
Satin, START ST are set at default before
changing the speed.
7-50
====
====