SunStar SWF/C Series User Manual page 52

2) Menu Screen (LCD)
Displays the set-ups and the main & sub menus selected.
① Set-up
There are 10 types of set-up information. Four will be listed at a time. Press UP or DOWN on the right side of
the LCD screen to move to another screen.
NO: memory number of the selected design
STITCH: number of total stitches in the selected design
COLOR: number of color changes (needle bars) in the design
JUMP: number of jump stitches in the design
X[mm]: the X dimension (left to right) of the selected design
Y[mm]: the Y dimension (top to bottom) of the selected design
ANGLE: the selected orientation of the design by degrees
MIRROR: if the reverse function is selected
X_SCALE: if the design has been scaled up or down in the X direction
Y_SCALE: if the design has been scaled up or down in the Y direction
The above data are accurate based on instant calculation.
② Sub Menus
Main menus are selected by keys on the control panel. Sub menus will appear on the screen at your selection
of a main menu. All sub menus cannot be indicated on a single screen. Use UP/DOWN buttons to move to
another screen.
Ex) selection of basic set-up
NO :
STITCH :
COLOR :
JUMP :
X [mm] :
Y [mm] :
ANGLE :
MIRROR :
X_SCALE :
Y_SCALE :
1] X_SCALE :
2] Y_SCALE :
3] ANGLE :
4] MIRROR : NO MIRROR
7-8
8
16850
6
118
83.4
101.6
45
OFF
100
100
100%
100%
0