SunStar SWF/C Series User Manual page 60

■ ■ EXTERNAL INPUT: Reading Design from Outside
1. GNT2910: reads data from Tape Reader
2. GNT4604: reads data from Tape Reader
3. SERIAL: enables data correspondence between PC and the machine
4. PARALLEL: reads data from SWF-NET1
Ex) Reading data from GNT2910 and storing it in memory #25
Place the cursor at GNT2910 and
press
Move the cursor to #25
Press
1] GNT2910
2] GNT4604
3] SERIAL
4] PARALLEL
SELECT EMPTY ROOM
==>
PRESS SET TO START !
==>
NOW DATA READING !
7-16
15
EXIT TO PREVIOUS