SunStar SWF/C Series User Manual page 75

■ ■ Optimize Trace
① This enables you to quickly check the outline of the selected design by tracing the outline.
② The arrows in the picture show the path of the trace. The design will be traced at its furthest points. If it is too
large for the hoop, the frame stops and the message "Frame Limit Error"will appear on the screen. To use this
Machine Set-Up 2. Machine SET 3. Frame Limit Set
function, select and in the start menu to set the frame
to "YES" in the EMB FUNCTION.
limits and set 15. Frame Limit
7-31